Build a Permanent Foundation for a Mobile Home

1 ANSWERS

1. Guest367
   

    A wireless dwelling is set on pier footings made of concrete. This entails the dwelling is increased off the ground. Unless you establish evading, the underside of the dwelling is revealed and open to animals and children. An enduring answer to this difficulty is to establish a solid cinder-block foundation. This is a DIY task for somebody with concrete skills. It will take not less than a week to complete.
   
   • Lay 1 inch of gravel exactly under the wireless dwelling where you design to establish the foundation. Tamp the gravel down with a tamping device and let it resolve overnight.
   
   • Mix up mortar and water in a wheelbarrow, utilising the correct blending ratio particular on your cinder-block mortar. Use a trowel to blend the mortar until it is the consistency of a milkshake.
   
   • Trowel about 1 inch of mortar up on the gravel exactly under the dwelling in one corner. Place a cinder impede into the mortar so the solid, flat edge is opposite in the direction of you. Check to double-check the impede is grade, utilising a carpenter's level.
   
   • Spread mortar on the gravel besides the cinder impedes and requests some mortar to the edge of the first block. Place the next impede adjacent it about 1/2 inch away. Trowel added mortar between the blocks if needed. Repeat Steps 3 and 4 until the whole first strip of the base is complete.
   
   • Trowel 1/2 inch of mortar on peak of the first cinder impede and over half of the second impede in the first row. Lay one half cinder blocks on peak of the first impede, flush with the end of the wall. Spread mortar on the edge of this new impede, then location the next impede right adjacent it. Continue to request mortar and cinder blocks to construct the base up to your wireless dwelling frame.

   Report (0) (0)  |   12 years, 9 month(s) ago