ELECTROLUX WASHER DRYER REPAIRS

8 ANSWERS

1. Guest3877
   

   PROGRAMM RUNS FOR ABOUT 10SECONDS THEN DEOOR UNLOKS

   Report (0) (0)  |   12 years, 7 month(s) ago  

2. Guest1498
   

   machine begins to fill with water but then stops and start light begins to flash

   Report (0) (0)  |   12 years, 7 month(s) ago  

3. Guest4645
   

   i have an electrolux washing machine model EWX 1440W 2 years old. suddenly stop working. when you put the clothes in the machine, close the door and start the cycle. the machine clicks and opens the door back and does start the cycle.

   Report (12) (0)  |   12 years, 7 month(s) ago  

4. Guest1812
   

   electrolux ewx1440w washer-dryer keeps stopping in cycle and will not restart unless unplugged overnight.

   Report (17) (0)  |   12 years, 7 month(s) ago  

5. Guest1448
   

   My Electrolux washer dryer L16850 has lost all power and i can't open the door.  The repair guy won't be here til Tuesday and my baby's washing's going to be ruined.  Anyone know how i can open the door? thanks

   Report (13) (0)  |   12 years, 7 month(s) ago  

6. Guest1133
   

   i have an electrolux washer and dryer, i yr old , my clothes are never clean , and always smell bad , like they have been sitting in washer a few days  befor puting in dryer,  my clothes never smell clean when i take them out of washer, have washed them 2 and 3 times , what is up with that , want my old set back

   Report (0) (0)  |   12 years, 7 month(s) ago  

7. Guest5024
   

   Guest17444872
   
   I have the same problem as you, how did you fix it?
   
   i have an electrolux washing machine model EWX 1440W 2 years old. suddenly stop working. when you put the clothes in the machine, close the door and start the cycle. the machine clicks and opens the door back and does start the cycle.

   Report (0) (0)  |   12 years, 7 month(s) ago  

8. Guest6065
   

    Hi, does anyone have the answer to the problem whereby the EWX 1440W doesn't start the cycle and opens the door?  My g/f had this problem and an engineer came out and said it was a common fault... wrote the fault description as 'heater element to earth'  error code as 'EP4' and action taken as 'disconnect element and test ok'

   
   

   He told my g/f that he could fix it but the dryer wouldn't work, which at the time was ok for her.  However I want to fix it now so the dryer will work again so any info on this fault and what was done to fix it would be much appreciated!  :o)  I'm assuming its a case of sourcing a replacement for the defective heating element and replacing it but haven't had the machine open yet!  Cheers!

   Report (0) (0)  |   12 years, 7 month(s) ago