Question:

Kenmore Model 110.22952100 Top Load Washer -agitating very slowly on no load with sufficeint

by Guest9549 | 12 years, 8 month(s) ago

-agitating very slowly on no load with sufficeint water level and not agitating with clothes (even on low load only).
Water is draining on drain cycle but on spin cycle some abnormal sound( gear slipping sound) and it seems not spinning also.

Tags: 110.22952100, Kenmore, Load, model, top, Washer

Report

Answer The Question I've Same Question Too

Follow Question

2 ANSWERS

Sort By: Date | Rating

Guest5107

Sounds like the clutch is going out. The clutch is located on the agitator shaft, part of the gearcase at bottom of tub. To replace it, you have to remove the agitator, disconnect water and drain hoses and then lay machine on it's back. Then disconnect the pump which is connected to the drive motor. The drive motor and gearcase come out as one unit and swap out the clutch, and reinstall is the reverse order. It helps to download a schematic from Sears parts. It should taker about 1-2 hours, depending on ability and tools are simple, nothing fancy.
Report (0) (0) | 12 years, 8 month(s) ago
Guest7949

How do I remove the inlet water valve from a kenmore top load washing machine mdl 92573210
Report (0) (0) | 12 years, 8 month(s) ago