Philips Universal Remote Control Codes Finder

1 ANSWERS

1. Guest4909
   

   Remote control is now an important part of video, audio devices. It is included with every television set to improve your seeing experience. With the remote control, you can watch channels and set the volume crosswise, as well as change your TV's settings by going to its menu. Normally, the menu on a TV is as basic as imperative the Menu button on its remote; however, if your remote runs out of batteries, receives misplaced or contravenes, you will deficiency to access the menu through the actual video box. Fortunately, all TV production plants deliver this feature.
   
   You can find Philips Universal Remote Control Codes at: p4c.philips.com/cgi-bin/dcbint/urccf.pl?slg=EN&scy=GB

   
   

   However, you can set your remote control without codes as well.

   
   

   Turn on your TV (or other device). You will have to perform by yourself until you program your Philips remote control.
   
   Search for the "Setup" or "Code Search" button on the Philips remote control. Which button your remote has will depend the Philips remote control you are using. This button may be a dissimilar color or may be labeled.
   
   
   
   Hold either the "Setup" or "Code Search" button for come seal 10 seconds. If your remote has a small light, the light will start blinking. You can just be reliant to 10 and afterward let go of the button.
   
   Push the "TV" button on the remote control to program the Philips remote to your television set.
   
   Locate and press either the "Up" or "Down" channel button on the remote. Continue pushing either button until the TV channel changes. This may take few minutes. Once the channel modifies, press the "Power" button on the remote to switch off the TV. Your Philips remote control will now be tuned according to your television.
   
    

   Report (0) (0)  |   12 years, 8 month(s) ago