Before knowing how to actually replace the optical drive for Xbox 360, it is somehow important to know how to remove the older or the damaged one in the first place. It involves 6 steps in total and are very simple to understand.
Step 1 — Hard Drive
· Take hold of the hard drive assembly and press the release button while lifting its front edge.
· Remove the hard drive assembly from the top vent.
Step 2 — Bottom Vent
· Make the console stand vertically with the bottom edge facing up.
· Insert the flat end of a spudger or the edge of an Xbox 360 opening tool into the small gap at the front edge of the bottom vent.
· Meddle the front edge of the bottom vent away from the faceplate.
Step 3
· Use the tip of a spudger or the finger of an Xbox 360 opening tool to release the clips along the left and right sides of the bottom vent. Their locations are highlighted in red.
· You will insert the tool into the holes molded into the white plastic side case pieces.
Step 4
· To let loose the clips, work from the front edge of the bottom vent.
· When you are slightly lifting the front edge of the bottom vent, use the tip of a spudger to push the clips closest to the front of the bottom vent towards the inside of the console.
Step 5
· Repeat the same process to release the two center clips on the bottom vent.
Step 6
· Use the tip of the spudger to release the clips on the bottom vent nearest the back of the Xbox.
Report (0) (0) |
12 years, 6 month(s) ago