adjust timing on 1992 ford truck v8 5.8l. 351w. engine

1 ANSWERS

1. amomipais82
   

   Hi,
   Your current problem seems to be a dirty idle air control valve, or MAP sensor as you asked. My question is this, did it stop dying after replacing the other parts? My guess is that you should be able to clean the idle air control valve and throttle body where you are. Find some rubbing alcohol and put it on a cotton towel or old shirt. Use some elbow grease and remove the carbon deposits. It sounds to me, that you needed a good tune up and got most of it, now you need to knock it home. On the way home, stop at the parts store and buy a fuel filter, and a can of air intake and throttle body cleaner.

   Report (0) (0)  |   12 years, 9 month(s) ago