How to install I9000XXJVS Firmware on Galaxy S?

1 ANSWERS

1. Jennifer
   

    "Prerequisite:
   
   • Samsung USB Drivers
   
   • Odin software
   
   • Charge your phone battery up to a good level
   
   Now follow these steps carefully:
   
   Phase 1- setting up PC and backup
   
   • Install the Samsung USB drivers
   
   • Unzip the main firmware file and you will see these files:
   
   1. CODE_I9000XXJVS_CL565837_REV03_user_low_ship.tar
   
   2. GT-I9000-CSC-MULTI-OXAJVS.tar
   
   3. MODEM_I9000XXJVS_REV_00_CL1059471.tar
   
   4. s1_odin_20100512.pit
   
   • Take Backup of your contacts messages and other data from your phone. Please note that this procedure doesn`t format your internal memory, only messages, contacts and apps will be erased.
   
   • Shut down Samsung Kies completely
   
   • Run Odin file
   
   • Power off your Galaxy S and wait till one vibrate comes to ensure complete switch off
   
   Phase 2 - Upgrading the firmware
   
   • Hold Volume down key+ Home button key and press power on to go into download mode
   
   • Connect your phone with USB cable
   
   • You should get the message “Added” under the Odin’s message box in the bottom left.
   
   • Check only Re partition, Auto reboot & F. Reset time in option
   
   • Put the files like this in Odin:
   
   1. PIT = s1_odin_20100512.pit,
   
   2. PDA = CODE_I9000XXJVS_CL565837_REV03_user_low_ship.tar,
   
   3. Phone = MODEM_I9000XXJVS_REV_00_CL1059471.tar,
   
   4. CSC = GT-I9000-CSC-MULTI-OXAJVS.tar
   
   • Press the start button and process will start
   
   • Wait until your phone gets restart and then unplug the cable
   
   *Installing custom firmware is a risky procedure please install it at your own risk. Do it only if Model number exactly matched to i9000."

   Report (0) (0)  |   12 years, 5 month(s) ago