London Eye: ultimate mile high?

2 ANSWERS

1. amomipais82
   

   Hi there,
   The Merlin Entertainments London Eye (known more simply as The London Eye, and also known as the Millennium Wheel), at a height of 135 metres (443 ft),[1] is the largest Ferris wheel in Europe, and has become the most popular paid tourist attraction in the United Kingdom, visited by over three million people in one year.[2] At the time it was erected, in 1999, it was the tallest Ferris wheel in the world, until it was surpassed by the Star of Nanchang (160 m) in May 2006, and then the Singapore Flyer (165 m) on 11 February 2008. However, it is still described by its operators as "the world's tallest cantilevered observation wheel" (as the entire structure is supported by an A-frame on one side only).[3]
   
   The London Eye is located at the western end of Jubilee Gardens, on the South Bank of the River Thames in London, England, between Westminster Bridge and Hungerford Bridge. The site is adjacent to that of the former Dome of Discovery, which was built for the Festival of Britain in 1951.
   he wheel carries 32 sealed and air-conditioned egg-shaped[4] passenger capsules, attached to its external circumference, each capsule representing one of the London Boroughs.[5] Each 10 tonne[1] capsule holds 25 people,[4] who are free to walk around inside the capsule, though seating is provided. It rotates at 26 cm (10 in) per second (about 0.9 km/h (0.6 mph) so that one revolution takes about 30 minutes. The wheel does not usually stop to take on passengers: the rotation rate is so slow that they can walk on and off the moving capsules at ground level.[1] It is, however, stopped to allow disabled or elderly passengers time to embark and disembark safely.[6]
   Monochrome image of the London Eye
   
   The rim of the Eye is supported by tie rods and resembles a huge spoked bicycle wheel, and was depicted as such in a poster advertising a charity cycle race. The lighting for the London Eye was redone with LED lighting from Color Kinetics in December 2006 to allow digital control of the lights as opposed to the manual replacement of gels over fluorescent tubes.[7]
   
   The wheel was designed by the architectural firm Marks Barfield Architects[8]. Initial engineering design was by Arup[9]. Allott & Lomax (now part of Jacobs Engineering Group) were the independent checking engineers[10]. Mace were responsible for construction management with Hollandia as the main steelwork contractor and Tilbury Douglas as the civils contractor. Consulting engineers Tony Gee & Partners designed the foundation works while Beckett Rankine designed the marine works. The wheel was constructed in sections which were floated up the Thames on barges and assembled lying flat on piled platforms in the river. Once the wheel was complete it was raised into an upright position by a strand jack system, at 2 degrees an hour until it reached 65 degrees. It was left in that position for a week while engineers prepared for the second phase of the lift. The total weight of steel in the Eye is 1,700 tonnes (1,870 short tons). The project was European with major components coming from six countries: the steel was supplied from the UK and fabricated in The Netherlands by the Dutch company Hollandia, the cables came from Italy, the bearings came from Germany (f*g/Schaeffler Group), the spindle and hub were cast in the Czech Republic, the capsules were made by Poma in France (and the glass for these came from Italy), and the electrical components from the UK.[11]

   Report (0) (0)  |   12 years, 8 month(s) ago  

2. Guest8078
   

   been on it twice- the view is amazing.
   dont understand your question, re-phrase =)
   cheers.

   Report (0) (0)  |   12 years, 8 month(s) ago