Question:

Mercury 250HP trim won't go up

by Guest8084 | 12 years, 9 month(s) ago

I'm able to trim the motor down, but it won't go back up. It doesn't click or anything. I need to get this motor up so I can return home this afternoon.

Tags: 250HP, Mercury, trim, wont

Report

Answer The Question I've Same Question Too

Follow Question

1 ANSWERS

Sort By: Date | Rating

amomipais82

Hi there,
By switching the relays around it doesn't go up or down? Is that correct? If 1 worked before in the down position that relay should still work whether going down or up. The wires coming from the power tilt motor, The blue or green ones. If you find the ends and run a wire from positive battery post to either wire does the motor tilt up on the blue and down on the green? Daryl

Sorry for the confusion, but when I switched the relays as suggested, the tilt would still go down, but not up. So, the suggestion by Daryl did not seem to correct the issue. The tilt motor runs, I can lower the prop but I cannot raise the prop. I have a single ram system, I have checked the fluid level and I don't see any fluid leaks anywhere.
Report (0) (0) | 12 years, 9 month(s) ago