To make a multiple frame photo collage

1 ANSWERS

1. Guest6465
   

    Photographs brandished in a multiple likeness border notify a story. You can blend multiple photos in a level or in an upright orientation. Making your own collage image border to brandish multiple photos does not need you to understand how to slash mitered corners. Cut and gather a straightforward flat multiple borders in one afternoon.
   
   • Set the border glimpsed halt on 43 cm. Cut two extents of timber 43 centimeters long. Set the border glimpsed halt on 14 cm. slash four extents of timber 14 centimeters long.
   
   • Mark both 43 centimeters extents of timber with pencil at 4 centimeters, 13, 17, 26, 30 and 39 cm. Place the 4 centimeters extents of timber perpendicular to the two long extents of wood. Align the short parts between the brands on the 43 centimeters parts of wood.
   
   • Assemble the parts on a table and verify that the components line up properly. Place one short part at each end and two in the center to pattern three openings that are each 9 centimeters wide. Apply glue to the peak each short part of timber to glue it to the long piece.
   
   • Glue the other long part to the other end of the short parts of wood. Clamp the border at each corner. Allow very fast drying glue to dry not less than three hours.
   
   • Sand the border utilising fine grit sandpaper for a glossy finish. Apply a timber stain to agree decor and delay for the stain to dry. Finish the collage border with a sealant or a satin complete polyurethane gloss and permit drying.
   
   • Cut a part of business card supply paper 42 centimeters broad and 13 centimeters tall. Place your photos face down on the back of the border over each opening. Tape each image to the back of the border at the peak and bottom. Place the business card supply paper over the photos on the back of the border and protected with a little staple. Attach image suspending cable to the back to suspend the image frame.

   Report (0) (0)  |   12 years, 8 month(s) ago