To upgrade an eMachine W3410

1 ANSWERS

1. Guest4809
   

    The eMachine W3410 is a allowance desktop computer. Like any other computer, it values RAM (Random Access Memory) modules to operate. These are green, rectangular chips that power your computer so it can run programs. The recollection is established in the tower, so if you desire to improvement your computer, you can open up the tower and restore the RAM.
   
   • Turn off your eMachine 3410 and unplug all twisted cords from the docks at the back of the tower.
   
   • Remove the attachments on the back bends of the tower. These are the attachments that contain the edge get access to section in place.
   
   • Slide the removable edge section off of the computer tower to reveal the interior constituents and wiring. The rectangular recollection module will be evident attached to the motherboard.
   
   • Pull the steel keeping tabs on either edge of the recollection module outward and the module will burst up slightly.
   
   • Remove the vintage module from its dock and set it aside.
   
   • Fit a new DDR2 recollection module (available from your localized computer provide store) into the dock and impel it softly down until the tabs break in location and protected it.
   
   • Replace the edge section and back attachments of your eMachine. Plug the twisted cords back into the docks on the back of the tower.

   Report (0) (0)  |   12 years, 7 month(s) ago