0 LIKES LikeUnLike
I need to change my dryer belt. I tried to replace it but could not do so. It has wasted a lot of my time. Could you help me in replacing it easily. I would be very thankful to you if you help me to fix it.
Tags: belt, Change, dryer
First you should unplug the dryer and open the dryer door with care. There are screws under the top lid. Unscrew these screws. After removing the screws, need to lift the top off of the dryer. Now you will remove the screws on the front panel’s inside-top corners. It will help you to remove and set aside the front panel of the dryer. You should remove the front panel with care to avoid the damage of the door-control wires. Now you need to find two screws which are approximately 6 inches off the floor on each side. Now remove them. It will help you to push the dryer sides so the drum can be separated. Now pull the drum of the dryer slightly toward you to separate the belt of the dryer from the motor pulley. After removing the dryer belt from the motor pulley, the drum should be pulled up slightly and get out of the dryer to you. Now you can replace the old dryer belt with new the new belt, with the help of ribs of the belt facing towards the drum. Try to place the slack part of the belt near to the motor. Now repeat the instruction given before to change the drum, insert and tight the screws for holding the sides in place. I hope all this will be very helpful for you. Good Luck!
Report (0) (0) | 12 years, 9 month(s) ago
Latest activity: 13 years ago. This question has 1 answers.