iat sensor location 2000 mercury sable ls 24v

2 ANSWERS

1. amomipais82
   

   Hi There,
   To access this area and change the PCV valve just follow these directions. They aren't as complicated as they seem...
   
   using a 5/16" socket, loosen and remove the positive side cable of the battery.
   using a 5/16" socket or nut driver, loosen the worm drive clamp that holds the breather hose onto the manifold.
   next unsnap the clamps that hold the breather hose to the air filter housing.
   noting their positions disconnect the 3 airlines that connect to the breather hose.
   disconnect the 2 electrical connections from the air intake hose. The front one is the mass air flow (MAF) sensor and the back one is the intake air temperature (IAT) sensor, remove the air intake hose and set aside.
   now using a 5/16" socket remove the 2 screws holding the throttle cable cover.
   remove the 2 screws holding the throttle cable bracket. You now have the best access to the PCV valve.
   
   B) Now to replace the PCV valve pull the u shaped hose off the elbow. I recommend purchasing this molded new hose for about dollars from your Ford dealer. They tend to clog or collapse after several years. Next simply pull the PCV valve out of the oil separator hose and insert the new one. The whole process can be done in 15 to 30 minutes and save you a lot.

   Report (0) (0)  |   12 years, 9 month(s) ago  

2. Guest7050
   

   It is better to waste chi hair straighteners one's youth than to do noting bose on ear headphones with it at all. One cell phones thing I know. If a jewel falls into the nokia 8800 arte mire, it remains as precious as before; and though dust should ascend to bose in-ear headphones heaven, its former worthlessness will not altered. http://www.joyceb2b.com/

   Report (0) (0)  |   12 years, 9 month(s) ago