0 LIKES LikeUnLike
It runs, wire can be pulled but, will not push/pull wire on any setting. Whell does not spin freely./END
Tags: feed, lincoln, MIG, welder, wire, wont
I have a 180 HD and i have the same problem so i unhooked the wires from the gun to the machine and i hooked a wire to the plug on the welder where the gun plugs in and the wire started to feed so my guess is that the gun which is a L100 on is bad . there should be two wires that go from the gun trigger to the welder use a jumper wire to conect them and see if your wire feeds and that should tell you if its the gun trigger.
Report (0) (0) | 12 years, 7 month(s) ago
Latest activity: 12 years, 11 month(s) ago. This question has 1 answers.