my cp220 printer prints only half a picture on the right hand side of paper, why?

1 ANSWERS

1. Guest987
   

   Go to driver's properties page in control panel, and disable the bidirectional support there. You can do this by following the method given below:

   
   

   First go to start menu then click at Control Panel, further go to Printers, right click on your printer tab.
   
   Properties, under the 'Details' tab click "Spool Settings" and down the bottom you can choose not to support bidirectional support.

   
   

   I have also given the instructions to fix paper jam below. This might be very helpful in near future.

   
   

   First you turn the printer off and on to check if it can automatically clear jam. There are many models of the printers that provide an error-code list on the front panel display. If your printer is showing an error code, check the printer manual to identify the paper jam location in the printer.
   
   Try to pull the jammed paper out if it is visible in the printer. If not, then open the top of the printer to get the jammed piece of paper.
   
   Hold the paper and pull out gently. If the printer persist the problem of paper jamming, inspect the rollers to make sure that they are obtaining the paper and pulling it along the paper route properly.
   
   Check the paper path for any blockages, and clear if found. Also, inspect the other parts that the paper passes through, to make sure that they are not dirty or gummy. If any dirt or other particles are found, clean them and try again.
   
    

   Report (0) (0)  |   12 years, 6 month(s) ago