Complete information about how to Pot a Dracaena

1 ANSWERS

1. Guest322
   

    There are numerous kinds of Dracaena, encompassing the Corn Plant and Ribbon Plant. They need little care one time they are sown in their vessels and will reside for numerous years. Dracaena plants should be re-potted one time every three years to permit adequate room for correct origin development in the pot.
   
   •            Locate a vegetation vessel with drainage apertures that is the identical dimensions as the nursery vessel that the Dracaena is sown in. Opt for a hefty vessel, which will hold the vegetation from dropping over if it gets top-heavy.
   
   •            Fill the vegetation vessel 1/3 full of a general-purpose sealing soil.
   
   •            Turn the Dracaena vegetation on its edge and drag off the nursery pot. Set the origins of the vegetation into the vegetation pot; double-check that it is flawlessly upright and does not lean.
   
   •            Add added sealing dirt round the vegetation origins until it is grade with the peak of the dirt on the Dracaena roots. Pat the dirt thinly to firm it; manage not load it down tightly.
   
   •            Set a saucer below the Dracaena vessel to apprehend water runoff. Water the dirt until it seeps out of the vessel base and into the saucer. Wait two hours to permit the dirt to reabsorb the water, and then dispense out any surplus from the saucer.
   
   •            Pour a fluid vegetation fertilizer into a container and add two times the allowance of water that is recorded in the fertilizer instructions. Pour half of the blend into the dirt to supply nutrients for the origins as they get established.
   
   •            Place the freshly sealed Dracaena beside a window that gets abounding of brilliant lightweight, but no direct sunlight.

   Report (0) (0)  |   12 years, 9 month(s) ago