cant get the weight on or off the select tech

2 ANSWERS

1. Guest793
   

   The problem  is probably that the silver actuator tab on the base has broken-it is screwed into the base with 2 small screws-if the weights are slammed back into the base this tab is pushed down and no longer actuates the release button on the weight stack-

   Report (0) (0)  |   12 years, 8 month(s) ago  

2. Guest270
   

   1]One of mine was stuck in the plastic base and one side would not turn. I could see that it wasn't quite all the way down in the base by maybe two or three millimeters. The k**b was between 52.5 and 5 lbs. Very frustrating. I used a dentist pick to push up the button which still would not release the pin. Finally I took the base (4 screws) off and removed the two metal brackets held on with two screws on the side that was stuck. It came apart nicely and seems to work fine after reassembly. There is some slight damage to the plastic guides on several of the weights probably from becoming stuck and possibly from me trying to turn the k**b with the weights stuck. I think it will be fine.
   
   2]Push the button on the bottom of that releases the adjuster to spin. Set both to sides to 5, put all the weights back and your ready to place it back and select a weight.

   Report (0) (0)  |   12 years, 8 month(s) ago