tub will not start from air switch

1 ANSWERS

1. amomipais82
   

   Hi,
   Locate the air switch if there is two wires unplug them and make a male jumper wire with a male prong on each end and jump across these two wires and plug in and see if it works and if it does replace the air switch available at most spa dealers and if not the motor needs work. If you have a 2 speed pump the air switch has 3 wires in which case the very top offset wire is common and your homemade jumper goes between it and one of the two below. Then jump one at a time between each one same results same problem.

   Report (0) (0)  |   12 years, 9 month(s) ago