how do i remove the key chuck on a power 10mm makita drill?

1 ANSWERS

1. Guest6231
   

    Power 10mm Makita drill is one of the most powerful drills in the market. There are three adjustable jaws that are tightened by a thick metal collar. Some drills use a chuck key to adjust the metal collar, while others use a keyless chuck that can be adjusted by hand. Over time, the chuck may become worn down or lose tension. It becomes very dangerous but can easily be adjusted by the following steps:
   
   Open the drill chuck as far as it will go and look inside. Some drills have a s***w inside the chuck that must be loosened before the chuck can be removed.
   
   Use a rubber mallet to tap the wrench counterclockwise until the chuck begins to loosen.
   
   Place the new drill chuck onto the spindle and turn it clockwise as far as you can.
   
   Loosen the chuck jaws and remove the Allen wrench by which you were tightening.
   
   Your drill, expertly fitted with your brand new chuck, should now be good to go.

   Report (0) (0)  |   12 years, 8 month(s) ago